Fast temperature rise and high energy utilization rate can save energy consumption and cost for customers. Multi layer belt structure, small floor area and resource saving. High power circulating fan ensures uniform temperature distribution of the whole machine without convection dead angle, speeds up water evaporation and improves High productivity. This series of drying equipment is customized according to customer requirements. The aluminum silicate cotton insulation design of the whole machine makes full use of heat energy and good drying effect.

The main body of the machine is made of 304 stainless steel with a thickness of 2mm. The legs are made of food grade stainless steel square tubes with height adjustment bolts. The mesh belt is food grade stainless steel spiral with a width of 800mm. P205 adjust the tightness of the mesh belt of the bearing support. Exterior decoration The veneer is a 1mm thick stainless steel wire drawing plate, which is insulated with aluminum silicate insulation cotton except the bottom. The frequency conversion motor drives the mesh belt to transport products. The frequency converter is Shenzhen easy drive brand, and the motor speed is 9-45 RPM adjustable. Steam finned heat exchanger The temperature can be set according to production needs. PT100 temperature sensor, Xiamen] Yudian temperature controller controls the operation of axial flow fan, and axial flow fan blows and dissipates heat.

The mesh belt, support frame and other main parts of the machine are made of SUS304 stainless steel. The snail fan forms strong current wind by passing the natural wind through the air knife. The mesh belt can be turned over at a certain distance to ensure the cleaning of moisture and other substances on both sides Except. The machine is suitable for products with low requirements for heat sensitivity and water removal and drying effect. Heating device can be added according to customer requirements.

The main body of the machine is made of SUS304 stainless steel. The stainless steel mesh belt runs stably, has long service life and adjustable running speed. The high-power strong flow fan can produce low-temperature and high-speed air flow to remove the moisture on the product surface. This machine is suitable for washing The length and width of the whole machine can be processed according to customer requirements.

The working principle of the machine is high-pressure and high-temperature water cleaning. The high-pressure water pump circulates the heated water in the water tank to the spray pipe, which is sprayed by the nozzle on the spray pipe to form a high-pressure and high-temperature water flow to wash the turnover box and wash the dirt away from the surface of the turnover box. During cleaning Various cleaning solvents can be added to improve the cleaning effect. Except for the motor and nozzle, the machine is made of SUS304 stainless steel. The nozzle adopts temperature resistant quick disassembly plastic fan-shaped nozzle, and the brush is made of food grade nylon wire. clean The water tank is divided into two groups, each group is equipped with a filtering device, the clean water source can be recycled, the nozzle cleans the turnover basket from four directions, and multi-channel cleaning ensures that the surface is clean. Both sides of the cleaning room are movable waterproof doors, and both ends are closed with soft door curtains Water, convenient for equipment overhaul and maintenance.

The main body of the drum cleaning machine is made of SUS304 stainless steel. The double drum cleaning machine adopts the double drum cleaning structure. The front section is cleaned with detergent and the rear section is cleaned with clean water. The single drum cleaning machine needs to be used with the bubble cleaning machine, which is better than the double drum cleaning machine The washing distance of the drum washer is longer, which is suitable for products with dirty surface. The cleaning machine is driven by variable frequency motor, and the speed is adjustable. The equipment operates stably and has low noise. The water pump continuously circulates the water source, with large water pressure and wide cleaning area. Brush evenly in the drum The cleaning products are transported in the form of cloth and spiral, and the cleaning products are thorough and uniform. Clean water can be recycled to save water. The cleaning water tank is equipped with heating device for better cleaning effect. The cover of the whole machine can be opened separately to facilitate equipment maintenance.

Fast temperature rise and high energy utilization rate can save energy consumption and cost for customers. Multi layer belt structure, small floor area and resource saving. The high-power circulating fan ensures the uniform temperature distribution of the whole machine without convection dead angle, speeds up water evaporation and improves production efficiency. This series of drying equipment is customized according to customer requirements. The aluminum silicate cotton insulation design of the whole machine makes full use of heat energy and good drying effect.

The cleaning and drying line is composed of a liftable bubble picker, a two-stage drum cleaner, a limited lift and a multi-layer dryer. The main parts of each equipment are made of 304 stainless steel. The equipment of the complete set line shall have reasonable structure according to the actual product needs , combination optimization, high degree of automation and high efficiency. The overall control operation of the electrical control cabinet is simple. The complete set of linear speed is controlled and adjusted by frequency converter, and the cleaning temperature and drying temperature are automatically controlled. The complete line occupies a small space and has poor continuity The utility model shortens the time of bag cleaning, water removal and drying, improves the production efficiency, and saves the production cost for the enterprise. The complete line is applicable to the cleaning and drying of some fruits and vegetables in vacuum packaging and gas packaging.